Skywatcher Skymax 127 EQ3 PRO SynScan Goto Ktec Telescopes

Skywatcher Skymax 127 EQ3 PRO SynScan Goto

Skywatcher

  • €1.179,90
    Unit price per 
Tax included.

The highly-acclaimed Skymax-127 Maksutov-Cassegrain OTA excels for high-power Lunar and Planetary observations, double-star observations, as well as being suitable for terrestrial daytime observations.

 

The Skymax-127 features a compact but extremely powerful, high-contrast, high-resolution diffraction-limited optical system. High-transmission multi-coatings are employed on all optical surfaces for optimum performance.

 

 

Review of Skymax-127 OTA
“…Optically, all the lenses are multicoated and the internal baffles had no shiny surfaces that could cause reflections of bright objects…The Focuser was quite smooth with very little image shift…The field was sharp across 80 percent of the view…We were pleased with the quality of the view even when pushing the telescope to higher magnifications…Mars and Saturn bore high magnifications well…The rings of Saturn appeared sharply defined…Turning to the Moon, it was a revelation through the Skymax…This telescope certainly does a good job on the more detailed Solar System objects…In the deep sky, the Skymax performed well on everything to galaxies to nebulae”
Sky At Night Magazine

 

 

Technical Specifications:

  • Magnifications (with eyepieces supplied): x60 & x150
  • Highest Practical Power (Potential): x254
  • Diameter of Primary Mirror: 127mm
  • Telescope Focal Length: 1500mm (f/11.81)
  • Eyepieces Supplied (1.25"): 10mm & 25mm
  • Red Dot Finder
  • 1.25"/31.7mm Star Diagonal
  • EQ3 PRO SynScanTM Computerised Go-To Deluxe Equatorial Mount (Requires 12 volt DC Power Supply)
  • 42,900+ Object database containing complete Messier, NGC, and IC catalogues.
  • Focusing by Moving Primary Mirror
  • Built-in Polar Alignment Scope Holder
  • Aluminium Tripod with Accessory Tray
  • 55% more Light gathering than 102mm
  •  

 

PLEASE NOTE: The Motor Control box supplied (situated left of handset in above picture) is designed to clamp onto 1.75” Diameter Stainless Steel tripod legs. In this instance the Motor Control Box should be attached with either cord or Velcro (User Supplied)
Precision Computerised GO-TO Mount!!

Read more...

We Also Recommend